- Datamet

- Minimet

- Unicase

- Unidesk

- Unimet

- Unimet-Plus

19" Enclosures

- Instrumet 19"

- Mettec 19"

- Unimet 19"

- Versamet 19"

- Accessories

Request a written
quotation >>

Enclosures Accessories

For METCASE enclosures and others

Bail Arms / Swivel Handles >>

Modern and robust bail arms/swivel handles for
portable electronics equipment
30° indexing allows the enclosures to be tilted
when mounted on a desk
Arm kits consists of two plastic, or diecast
zinc, side arms and an extruded aluminium
handle bar
Aluminium handle bars are pre-cut to the required width - simply let us know the width of your enclosure

ABS Case Feet >>

Moulded ABS feet kits with or without tilt foot legs
Non-slip rubber inserts
Available in three standard colours
Simple drilling instructions included

Front Panels >>

3U x 10.5" & 19" front panels
19" front panel mounting kit
Front panel trims for custom front panels or replacements

PCB Accessories >>

PCB mounting pillars kit

Bail Arms / Swivel Carry Handle Bars

Part No. OKW MODERN TYPE Glass-Reinforced Polyamide		Part No. OKW UNIVERSAL TYPE Glass-Reinforced Polyamide		Part No. OKW METAL TYPE Die-Cast Zinc		Description/color combination	Drawings
A9300722						Side Arm Kit Arm - Off-white, RAL 9002 Button - Volcano grey
A9300822						Side Arm Kit Arm - Grey, RAL 7035 Button - Volcano grey
A9300522						Side Arm Kit Arm - Black, RAL 9005 Button - Volcano grey
Handle Extrusion**						Handle Extrusion (See Note**)
		A9300015				Side Arm Kit Arm - Black, RAL 9005 Button - Black. RAL 9005
		A9300016				Side Arm Kit Arm - Off-white, RAL 9002 Button - Pebble grey. RAL 7032
		A9300017				Side Arm Kit Arm - Off-white, RAL 9002 Button - Off-white, RAL 9002
		A9300018				Side Arm Kit Arm - Pebble grey. RAL 7032 Button - Off-white, RAL 9002
		Handle Extrusion**				Handle Extrusion (See Note)
				A9300014		Side Arm Kit Arm - Off-white, RAL 9002 Button - Pebble grey, RAL 7032
				Handle Extrusion**		Handle Extrusion (See Note**)
Notes: * MODERN TYPE: Mounted from the outside or inside. 30° indexing with push button. Removed in the 135° position. Auto overload disengage. * UNIVERSAL TYPE: Mounted from inside. 30° indexing with push button. * METAL TYPE: Mounted from inside. 30° indexing with push button. Anti-slip rubber inserts. ** HANDLE EXTRUSION: Give us the width of your enclosure (dimension W), and we will supply the handle extrusion cut to length. The handle extrusion is priced separately, ask us for a quotation

ABS Case Feet

Part No. Kit without tilt legs		Part No. Kit with tilt legs		Colour	Contents of kit	Datasheet
M5600015				Grey, RAL 7035	4 ABS feet, 4 non-slip inserts & screws
		M5600045		Grey, RAL 7035	4 ABS feet, 4 non-slip inserts, two tilt legs & screws
A9257107				Off-white, RAL 9002	4 ABS feet, 4 non-slip inserts & screws
		A9257207		Off-white, RAL 9002	4 ABS feet, 4 non-slip inserts, two tilt legs & screws
M5600019				Black, RAL 9005	4 ABS feet, 4 non-slip inserts & screws
		M5600049		Black, RAL 9005	4 ABS feet, 4 non-slip inserts, two tilt legs & screws
Notes: * The enclosure must be drilled in order to fit the feet (see datasheet)

Front Panels & Accessories

Part No. Standard 19" Front Panels		Part No. 19" Mounting Kit		Part No. Front Panel Trims*		Description	Drawings
							PDF	DWG
M6010001						3U x 10.5" Anodised Aluminium Front Panel
M6019010						1U x 19" Anodised Aluminium Front Panel
M6019020						2U x 19" Anodised Aluminium Front Panel
M6019001						3U x 19" Anodised Aluminium Front Panel
		M6000035				19" Mounting Kit (Grey Washers)
		M5900016				19" Mounting Kit (Black Washers)
				M5700020		50mm & 1U Case Front Panel Trim*
				M5700021		85mm & 2U Case Front Panel Trim*
				M5700022		120mm Case Front Panel Trim*
				M5700023		3U Case Front Panel Trim*
				M5700024		150mm Case Front Panel Trim*
Notes: * 19" Mounting Kit - 4 M6 caged nuts, 4 M6 Screws & 4 ABS plastic washers (light grey or black) * Front Panel Trims - not suitable for 10.5" and 19" front panels * 50mm & 1U Trim - for UNIMET, UNIMET-PLUS, METTEC 19" & MINIMET case front panels * 85mm & 2U Trim - for UNIMET ,UNIMET-PLUS, METTEC 19", UNIMET 19" & MINIMET front panels * 120mm Trim - for UNIMET, UNIMET-PLUS front panels * 3U Trim - For METTEC 19" & UNIMET 19" front panels * 150mm Trim - For UNIMET & UNIMET-PLUS front panels

PCB Mounting Kit

Part No.		Contents of kit	Drawing
M5600001		Item 1. - 10pcs M3 x 10mm Molded Pillars - Nylon-6, Glass 25%
		Item 2. - 10pcs M3 x 6mm Countersink Screws - M/S, Pozi
Notes: This kit can be used to cover the base fixing holes in order to ensure the IP 54 protection class

SITE LINKS
Company Home Page Site Map About Us Contact Us Ordering Ordering Info Distributors	Enclosures Aluminium Enclosures Custom Enclosures Enclosures Enclosures Accessories Instrument Enclosures Wall Mount Enclosures	19" Enclosures Rack Mount Enclosures 19" Enclosures	Services Catalogue Quotation Technical Drawings RoHS & WEEE	News New Products Press Releases More Enclosures OKW ROLEC TEKO	OKW ENCLOSURES LTD Tel. 01489 583858 Fax. 01489 583836 Email Us
Follow us on:

Last Updated 28-Jan-2013 ©OKW Enclosures Ltd. All rights reserved.