Search Your location/language , English
Combimet 19 inch enclosures

Combimet 19"

Universal rack mount enclosures to DIN 41494 and IEC 297-1

  • Versatile 19 inch rack cases in 1U to 6U heights and four depths
  • Very modern design incorporating ergonomic front panel handles
  • Super-deep 24" (610 mm) versions for server racks. Version T with open top 
  • Robust aluminium case body with removable top, base and rear panels
  • Top and base panels vented or unvented 
  • 19" front panel in anodised aluminium 
  • Mounting holes in base for PCBs and chassis
  • M4 earth studs on all components for electrical continuity
  • Two standard colours black or light grey
  • Cases supplied fully assembled.

Order your own fully customised version learn more here >>

  • Video

Application fields

Rack mounted electronics such as networking and communications equipment, industrial computers, sound and studio systems, laboratory instruments and industrial control systems.
  • Select Versions
  • Accessories
  • Catalogue Documents

Select which version/size you want and click "select".

 

Unventilated

Combimet 19" - unventilated

Ventilated

Combimet 19" - ventilated

Unventilated, solid top panel

Combimet unventilated, solid top cover

Open Top

Combimet open top 19 inch rack mount enclosures

M5600001 PCB mounting kit

M5600001

PCB mounting kit Kit of ten M3 plastic PCB mounting pillars which can be positioned anywhere in the enclosure. Pillar height 10 mm. Fits to Ø3.2 mm hole in the case panel. Supplied with M3 fixing screws to secure to base panel.

If PCB or mounting plate fixing screws are required please see our screw kit M5600010.

Supply 10 Nylon PCB pillars and 10 M3 x 6 mm countersink fixing screws.

Close

M5600001

PCB mounting kit PA 6
Black RAL 9005
M5600010 PCB/Panel Fixing Screws, M3

M5600010

PCB/Panel Fixing Screws, M3

Pack of 100 M3 x 6 mm pan head pozi drive screws. Used for fitting PCBs and mounting plates to the threaded standoffs in our standard enclosures: TECHNOMET, MINIMET

Also suitable for use in combination with M5600001 PCB Mounting Kit, to secure PCBs to the plastic mounting pillars. Fixing points are provided in the following enclosures for this kit: COMBIMET 19", VERSAMET 19", UNIMET 19", UNIDESK, UNIMET, UNIMET-PLUS, DATAMET

These screws can also be used to replace the standard slotted case assembly screws supplied with our UNICASE enclosures — if pozi drive screws are preferred.

Additionally, this screw pack may be useful if your enclosure has been customised with M3 threaded inserts and pillars.

Supply 100 M3 x 6 mm pan head fixing screws (pozi drive PZ1).

Close

M5600010

PCB/Panel Fixing Screws, M3 Steel
Zinc coated
6mm
M5900016 19" mounting kit

M5900016

19" mounting kit Mounting kit including all hardware for fitting a 19" rack case, subrack or front panel into a 19" rack.

Supply M6 caged nuts (x4), M6 x 16 mm screw (x4) and black plastic cup washer (x4).

Close

M5900016

19" mounting kit Black RAL 9005
M6000035 19" mounting kit

M6000035

19" mounting kit Mounting kit including all hardware for fitting a 19" rack case, subrack or front panel into a 19" rack.

Supply M6 caged nuts (x4), M6 x 16 mm screw (x4) and light grey plastic cup washer (x4).

Close

M6000035

19" mounting kit Light grey RAL 7035
M6200265 Mounting plate (265mm)

M6200265

Mounting plate (265mm) Internal mounting plate kit for COMBIMET 19" rack cases 265 mm deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.

Supply Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).

Close

M6200265

Mounting plate (265mm) Aluminium
Natural finish
335x230x1.5mm
M6200365 Mounting plate (365mm)

M6200365

Mounting plate (365mm) Internal mounting plate kit for COMBIMET 19" rack cases 365 mm deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.

Supply Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).

Close

M6200365

Mounting plate (365mm) Aluminium
Natural finish
335x330x1.5mm
M6200610 Mounting plate (24")

M6200610

Mounting plate (24") Internal mounting plate kit for COMBIMET 19" rack cases 24" deep. For mounting PCBs and electronic assemblies. Mounts to pre-punched holes in case base panels with the nylon pillars and screws supplied.

Supply Mounting plate, M3 nylon screw pillars (x9), M3 x 6 mm screws (x18).

Close

M6200610

Mounting plate (24") Aluminium
Natural finish
335x574.6x1.5mm